Rox Patented Anti-Vibration Pivoting ATV Handlebar Risers
- Anti-Vibe design reduces vibration in ATV handlebars at high RPM's and provides a shock dampening feature to protect components and rider during harsh impacts.
- Adjustable
Dual rotation points makes Rox ATV Handlebar Risers selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position. Rox Risers allow you to raise your stock bars or use a motorcross style handlebar and maintain stock height. - Universal
With its two piece design, Rox Riser will install on virtually any ATV that has clamps to hold the handlebars, making it incredibly universal. - Engineered and tested for maximum strength and durability.
- CNC machined from billet 6061 T6 aluminum anodized gold
- Rox 1 1/8" clamping riser doubles as your conversion kit for using larger style handlebars on your ATV with the bonus of getting the ability to adjust your handlebars forward and back as well as raise them up to the proper height.
- Patent # US 6,920,806 BZ
 |
2" Elite Anti-Vibration Risers for 7/8" and/or 1-1/8" Fat bars 2" Rise x 7/8 " Stem Clamp x 7/8" or 1 1/8" Handlebar. These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. These risers use 8mm bolts. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $154.95 Order now Product number 2R-AV2SE OUT OF STOCK |
 |
Anti-Vibe 2"x 7/8 "x 1 1/8" Anti-Vibration Risers A must have for today's high reving 450's. 2" Rise x 7/8 " Stem Clamp x 1 1/8" Handlebar. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $149.95 Order now Product number 2R-AV2SP OUT OF STOCK |
 |
Anti-Vibe 2 1/4" x 1 1/8"x 1 1/8" Anti-Vibration Risers Fit's 07 YFZ, & KFX 450's. 2 1/4" Rise x 1 1/8" Stem Clamp x 1 1/8" Handlebar. Anti- Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. Warning: Rox Anti-Vibe Pivoting Risers should not be used with ant-vibe aftermarket stems that have independent handlebar clamps. If stem has a one-piece dog bone style top clamp then it is okay. These will install directly on the 07 KFX 450 with stock bars, minor re- routing required. Also great for the 07 YFZ 450, longer cables and brake line required. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $154.95 Order now Product number 2R-AV2PP OUT OF STOCK |
 |
Anti-Vibe 2"x 7/8"x 7/8" Anti-Vibration Risers A must have for today's 450's- YFZ, TRX, LT-R,& KFX. 2" Rise x 7/8" Stem Clamp x 7/8" Handlebar. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $149.95 Order now Product number 2R-AV2SS OUT OF STOCK |
Rox Anti-Vibration Pivoting Handlebar Risers
- Warning: Rox Anti-Vibe Pivoting Risers should not be used with ant-vibe aftermarket stems that have independent handlebar clamps. If stem has a one-piece dog bone style top clamp then it is okay.
- Caution: First determine if you have adequate cable length before installing ATV handlebar risers
- Amount of extra cable length varies based on make and model
- It is recommended that you consult your local dealer - longer cables are available here at Rox Speed FX
- Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
- Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.
|
HANDLEBAR DEMENSIONS
|
|||
| Model | Height | Width | Degree's of Sweep |
| Stock bars | |||
| 04-05 YFZ | 3.75" | 30.75" | 22º |
| TRX | 3.5" | 30.5"< | 20º |
| Z400 | 4.1" | 30.75" | 20º |
| KFX700 | 3.5" | 30.25" | 18º |
| Predator | 3" | 30.875" | 25º |
 |
|||
| ATV | 3.125" | 31" | 14º |
| (Dana Creech) Moto | 2.375" | 31" | 14º |
|
|||
| Solex-1 1/8 | |||
| CR-HI | 2.375" | 32" | 16º |
| Deuce-7/8 | |||
| CR-HI | 2.375" | 32" | 16º |
| Quad | 3.25" | 32.11" | 17º |
ATV Bar Pads
ATV Handle Bars
ATV Dash Panels
ATV Grips
|
Maximum amount stock grip height can be raised before replacing front brake
line, throttle and/or clutch cables
Note: Cables and brakelines available here at Rox Speed FX |
||
| model | front brake line | throttle & clutch cables |
| 04-05 YFZ | 1.25" | 1.25" |
| TRX 450 | 1.25" | 2.5" |
| Z400, KFX400, DvX400 | 2" | 2" |
| KFX700 | 1" | 1" |
| 03-04 Predator | 2" | 2" |
| Examples | ||
| Z-400 | You could use a P3.5sp riser with a Solex CR-HI bend bar and have plenty of cable & brake line length; putting your new handlebars 1.75" over stock handle bar height. | |
| YFZ | You could use an B1.25s block riser with your stock bars or a AV2ss riser with a Deuce CR-HI bend bar; putting your new bars .75" higher than stock. | |