Home Apparel Promotional Vehicles Contact Us

Rox Block ATV Handlebar Risers

Does your back hurt after a days ride?
Do you want a more comfortable riding position?

Rox handlebar risers put you in a more comfortable riding position

	Pro-Offset block Riser Rox new offset block Riser raises your bar straight up (vertical) instead of up and back like a standard block riser. They will work on nearly any atv acting as a fat- bar adaptor or will work to raise your stock fat-bars on the new YFZ, KFX, and KTM's. True vertical rise is 1-1/4" so replacing your cables should not be necessary. Offset risers can also be position up and back for smaller riders. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $84.95 Order now Product number 2R-B12PO choose quantity
	Pro-Offset Elite block Riser Our new Pro-Offset Elite riser comes with the addition of 7/8" reducers. This allows you to clamp 7/8" bars or remove them to clamp 1-1/8" "fatbars", making use of your stock bars now at a more comfortable height and upgrading to fatbars later. Reducers lock into risers to insure no slippage between components, as well they have serrated teeth in them for maximum gripping power on handlebar. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center to center distance with 8mm bolt threads. Including YFZ, Raptor, TRX, EX, KFX, LT-R, LTZ, DVX, KTM, and more. Will not fit Polaris quads with out modifying stem. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $89.95 Order now Product number 2R-B12POE choose quantity
	1 1/4" ATV Block Risers for 7/8" handlebars Rox 1 1/4" Block Risers are designed to raise the stock 04- 06 YFZ 450 7/8" bars the maximum amount without having to replace the clutch and throttle cable or front brake line. This is also the maximum you can raise the stock TRX 450 7/8" bars with out replace the front brake line. Fits: 04-06 YFZ, all Raptors, TRX450,400EX,300EX,250X, Z400,KFX 400, DVX 400. Note: 1 1/4" Block Riser sits on top of OEM supporting handlbar clamp. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $29.95 Order now Product number 2R-B12S choose quantity
	PowerMadd Fat Bar ATV Block Riser Adaptor Universal Fat bar adaptor. convert your stock stem with 7/8" clamps to 1-1/8". Keep in mind this will give about 3/4" of rise. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image $39.95 Order now Product number 2PFA-14257 choose quantity

Pro-Offset Block Handlebar Risers installed on Yamaha YFZ 450

Notes:

Caution: First determine if you have adequate cable length before installing handlebar risers
Amount of extra cable length varies based on make and model
It is recommended that you consult your local dealer - longer cables are available here at Rox Speed FX
Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.