Rox Patented Pivoting ATV Handlebar Risers
Find a more comfortable riding position. Stop hunching over your handlebars by raising your bars with Rox handlebar risers for ATVs. With versions for both a 7/8" and 1 1/8" handlebars, Rox Risers fit the bill for making your ATV much more comfortable to ride.
Offered in a variety of heights, you can find risers that fit your personal needs, and put you in a position to be comfortable for a days riding adventure. With the added height to your bars you can eliminate stresses to your shoulders and hands. Better positioned handlebar risers allow you to feel more balanced, eliminating any awkwardness when sitting or standing on your ATV.
The rotation points for these risers allow you to position your handlebars for maximum comfort whether sitting or standing. When you are properly positioned on your ATV, you will feel greater control.
 |
2" Rise x 7/8" Stem Clamp x 7/8" Pivoting ATV Handlebar Risers Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
2"x7/8"x 7/8" and/or 1-1/8" Elite Series- Pivoting ATV Handlebar Risers These Risers allow you to clamp a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1-1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set this is the riser to go with. Reducers lock into risers to insure no slippage between components. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
2" Rise x 7/8" Stem Clamp x 1 1/8" Handlebars, Pivoting ATV Handlebar Risers Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
ATV 2" Rise x 1 1/8" Stem Clamp x 1 1/8" Pivoting ATV Handlebar Risers New lower height, Anodized Clear. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
3-1/2"x7/8"x 7/8" and/or 1-1/8" Elite Series- ATV Pivoting Handlebar Risers These Risers allow you to clamp a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1-1/8" aluminum "fatbar". Reducers lock into risers to insure no slippage between components. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
3 1/2" Rise x 7/8" Stem Clamp x 1 1/8" handlebars, Pivoting ATV Handlebar Risers Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
Pivoting Risers 5"x7/8"x1 1/8" This is the riser commonly installed on Grizzly's with CR- HI bars. Grizzly 700 Dash Panel coming soon. Panel covers up top of stem for a much cleaner look when installing Rox Pivoting Risers. Dash Panel also provides two holes for switches of your choice. (handwarmers, lights, etc.) Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
1" Lock Spacer Rox 1" Lock Spacer adds 1" of height to any Rox Elite Series Pivoting Risers. Provided with longer bolts. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
Serrated Steel Caps Designed to replace any 7/8" OEM cap using 8mm bolts. Cap is stronger and has serrated teeth to bite into risers for maximum holding power in extreme riding conditions with taller risers. View larger image |
Pivoting ATV Handlebar Risers
Notes:
- Caution: First determine if you have adequate cable length before installing handlebar risers
- Amount of extra cable length varies based on make and model
- It is recommended that you consult your local dealer - longer cables are available here at Rox Speed FX
- Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
- Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.
| HANDLEBAR DIMENSIONS |
|||
| Model |
Height |
Width |
Degree's of Sweep |
Stock bars |
|||
| 04-05 YFZ | 3.75" |
30.75" |
22º |
| TRX | 3.5" |
30.5" |
20º |
| Z400 | 4.1" |
30.75" |
20º |
| KFX700 | 3.5" |
30.25" |
18º |
| Predator | 3" | 30.875" | 25º |
|
|||
| ATV | 3.125" |
31" |
14º |
| (Dana Creech) Moto | 2.375" |
31" |
14º |
|
|||
| Solex-1 1/8 |
|||
| CR-HI |
2.375" |
32" |
16º |
| Deuce-7/8 |
|||
| CR-HI |
2.375" |
32" |
16º |
| Quad |
3.25" |
32.11" |
17º |
ATV Bar Pads
ATV Handle Bars
ATV Dash Panels
ATV Grips