Home Apparel Promotional Vehicles Contact Us

Rox Patented Anti-Vibration Pivoting Snowmobile Handlebar Risers

Anti-Vibe design reduces vibration in bars at high RPM's and provides a shock dampening feature to protect components and rider during harsh impacts.
Adjustable
Dual rotation points makes Rox Handlebar Risers selectively adjustable forward and back, allowing you to fit your handlebars to your preferred riding position.
Universal
With its two piece design, Rox Riser will install on virtually any snowmobile that has clamps to hold the handlebars, making it incredibly universal.
Engineered and tested for maximum strength and durability.
CNC machined from billet 6061 T6 aluminum anodized gold
Rox 1 1/8" clamping riser doubles as your conversion kit for using larger style bars on your snowmobile
Patent # US 6,920,806 BZ

2" Elite Anti-Vibration Risers for 7/8" and/or 1-1/8" Fat bars
2" Rise x 7/8 " Stem Clamp x 7/8" or 1 1/8" Handlebar. These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components, as well they have serrated teeth in them for maximum gripping power on handlebar. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers.

View larger image

$154.95
Order now
Product number 1R-AV2SE
OUT OF STOCK

Anti-Vibration Snowmobile Handlebar Risers

Installed Snowmobile Handlebar Risers

Notes for Anti-Vibration Snowmobile Handlebar Risers:

Caution: First determine if you have adequate cable length before installing handlebar risers
Amount of extra cable length varies based on make and model
It is recommended that you consult your local dealer
Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine, securely lifted and stabilized on jack stand, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.

Are Rox Risers durable?