NEW... Rox (Patent Pending) Height Adjustable Handlebar Risers for Snowmobiles
Rox new Height Adjustable Snowmobile Risers allow you to adjust your handlebar height easily on the trail, or in the back country. Increase your comfort by customizing your sled and it's feel to you. Embrace the ever changing conditions.
Increase your comfort and reduce back strain with these adjustable snowmobile handlebar risers. By moving your handlebars up and into a more natural and comforatble position you will enjoy wintertime more, and look forward to being on your sled with greater frequency.
We now offer wrenchless height adjustable snowmobile bar risers. These risers can be adjusted on the trail in moments without the use of wrenches or other tools. You don't even need to remove your gloves. Whether a slight change in position of your handlebars will increase your comfort for the remainder of the day, or you're going to change riders, the ability to increase or decreae the height of your handlebars in moments will imcrease your enjoyment of riding your sled.
Height Adjustable Snowmobile Handlebar Risers
- Rox H.A. Risers also take the guess work out of deciding which size to buy, now you can choose the range of adjustment or height you want; 4"to5.5" or6"to8.25".
- H.A. Risers give you the option of fitting one sled to multiple riders in minutes.
- Designed to replace OEM pivoting riser blocks or can be mounted to standard handlebar clamps with optional adaptor tube when used with straight handlebars.
- CNC machined from billet 6061 T6 aluminum and clear anodized.
- PATENT PENDING
 |
2.3"-4" SS Height Adjustable Risers Premium, Height Adjustable Risers. Only for use with 7/8" dia. handlbars. This low height design is a great replacement for OEM short extruded risers such as those found on short track Polaris IQ and Shift models. With the addition of our new pivot adapter (see below) they can also be used for raising stock bars with a flat plate stem. Upper portion of risers step inboard to clamp on original clamping area and therefore can be used with bars that have a bend, or "rise" in them. Extended cables and brake lines are likely necessary for this combination. 2 tone finish with dry- lube coated hardware to insure no corrosion and easy, more consistent adjustment. Note; Risers may have to be installed off-set forward or off-set back to avoid other components or cowl. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
NEW Universal Pivot Adapter Universal Pivot Adaptor bolts to flat plat stems with M8 threaded holes. Mainly designed for use with Rox 2.3"-4" Height Adjustable risers but can be used for other pivot risers as well. Does not come with riser. Rox 2.3"-4" H/A Riser will not work with Rox Adapter Tube clamped in OEM clamps because riser is unable to fully collapse with out interfering with original clamps. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
NEW 4.3"-7" SE Elite Height Adjustable Risers Premium, Height Adjustable Risers. Rox latest design offers more adjustment than ever. These Risers also come with limit stops that will limit the height to 6" in order to safely use the product if your cables do not allow you to raise the full 7". If cables are long enough or replaced with extended length lines, limit stops can simply be removed and full adjustment is available. This riser is a great replacement for OEM extruded risers on Polaris Dragon, all short track Ski-Doo XP and Rev's, Arctic Cat F-Series and CFR, as well as Yamaha Mtn. Nytro's (used with pivot adaptor). 4"-5.5" works the best on the Polaris Rush, call for details. 2 tone finish with dry-lube coated hardware to insure no corrosion and easy, more consistent adjustment. Note; Risers may have to be installed off-set forward or off-set back to avoid other components or cowl. Example- Rex X-package (t-post stem), Risers are installed off-set forward to avoid contact with the tether. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
NEW 6"-9" SE Elite Height Adjustable Risers Premium, Height Adjustable Risers. Rox latest design offers more adjustment than ever. These Risers also come with limit stops that will limit the height to 8" in order to safely use the product if your cables do not allow you to raise the full 9". If cables are long enough or replaced with extended length lines, limit stops can simply be removed and full adjustment is available. This riser is a great replacement for OEM extruded Risers on Ski-Doo XP Summit models. Allowing you to raise 1" over stock or 2" below stock for trail situations and easier fitment of covers. Also great for taller riders on short track Ski-Doo's and Arctic Cat CFR's. Applicable to other makes and models as well. Confirmation of sufficient cable length is always important before purchasing or installing taller risers. 2 tone finish with dry- lube coated hardware to insure no corrosion and easy, more consistent adjustment. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
4"-5.5" SE Elite Height Adjustable Risers for 7/8" and/or 1-1/8" Fat bars Available at Western Power Sports, Parts Unlimited, Marshall Distributing, and Kimpex dealers. These Risers allow you to clamp a stock 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1-1/8" aluminum "fatbar". Best Height Adjustable for Polaris Rush, call for details. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
Wrenchless lever kit for 4-5.5, 6-8.25, 2.3-4 H/A Risers Wrenchless Levers for Rox 4"-5.5", 6"-8.25", new 2.3"-4" Height Adjustable Risers. Note: levers may interfere with cowl when used with 2.3"-4" riser. Designed for quick and easy adjustment on the trail with out the need for tools or removing your gloves. Available at Western Power Sports, Parts Unlimited, Marshall Distributing, and Kimpex dealers. This kit is not correct for Rox New 4.3"-7" or 6"-9" H/A Risers. Handles are spring loaded and should be orientated up and parallel with the risers so they don't interfere with anything on the cowl (choke, tether, etc.) Not recommended for racing or extremely aggressive riding. View larger image |
 |
Wrenchless Lever kit for Rox New 4.3-7, and 6-9 H/A Risers Designed for quick and easy adjustment on the trail with out the need for tools or removing your gloves. Handles are spring loaded and should be orientated up and parallel with the risers so they don't interfere with anything on the cowl (choke, tether, etc.) Not recommended for racing or extremely aggressive riding. View larger image |
 |
1" Lock Spacer Rox 1" Lock Spacer adds 1" of height to any Rox Elite Height Adjustable Risers. Provided with longer bolts. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
H/A Offset Adapter for 7/8" bars This Offset Adapter allows you to run our Height Adjustable Riser with stock bars that have rise in them. This offset lets you clamp on the original clamping area of your stock bar. With out this part you would be trying to clamp on the curved area of the bar as it begins to rise. If you are replacing an OEM pivoting block riser you should not need this part. If your stock bar has rise in it and you are clamping our adaptor tube into the original clamps and then looking to run our Height Adjustable Riser on the outside of your original clamps, you will need this part to bring the clamping area back over to the original clamping area of the bar. Finally, this part will ONLY work with SE Elite risers. They will NOT work on older SS risers. If this is confusing to you at all please call before ordering 218-326-1794. Always check and confirm that your vehicle has adeguate throttle cable, brakeline and wiring length for proper function and operation at the maximum height of riser before installation. View larger image |
 |
7/8" Snowmobile Adapter Tube 7/8" x 6" knurled adapter tube can be clamped in standard handlebar clamps. This allows you to clamp Rox Height Adjustable Risers to portion of tube that is sticking out beyond original clamps. The bars you are clamping must be STRAIGHT bars or have a clamping area 2" wider than your original clamps. Most OEM bars with a bend or rise in them, bend up as soon as the exit the original clamps. The Height Adjustable Risers can not be clamped on this bend. Please call if you have questions concerning this application on your sled. 218-326-1794 View larger image |
 |
7/8" X 2" adapter tubes 2 View larger image |
Height Adjustable Snowmobile Handlebar Risers
Installed Snowmobile Risers
Snowmobile Bar Pads
Rox Universal Grips Strips
Snowmoble Handguards
Snowmobile Grips