Home Apparel Promotional Vehicles Contact Us

Snowmobile Specials

Assault hooked bar kit
Kit includes- Rox 4.3"-7" Height Adjustable Risers, (no- rise) 12 degree hooked handlebar,7/8" adaptor tube, Hi- output grip heaters, ODI Ruffian grips. Stock Assault Pro-Taper handlbars have roughly 6.5" of rise in them. This kit allows you to go .5" higher and 2.2" lower. You may want to add our 1" lock spacer making it a 5.3"-8", giving you adjustment from 1.5" higher than stock to 1.2" lower than stock. You will need a split throttle block to go over the hook in the bar. Stock throttle does not slide over. Wrenchless levers and bar pads available seperatly.

View larger image

$279.00
Order now
Product number Assault-HK01
OUT OF STOCK

Assault straight bar kit
Kit includes- Rox 4.3"-7" Height Adjustable Risers, (no- rise) 12 degree handlebar (no hooks),7/8" adaptor tube, Hi- output grip heaters, ODI Ruffian grips. Stock Assault Pro- Taper handlbars have roughly 6.5" of rise in them. This kit allows you to go .5" higher and 2.2" lower. You may want to add our 1" lock spacer making it a 5.3"-8", giving you adjustment from 1.5" higher than stock to 1.2" lower than stock. Stock throttle can slide over this non hooked bar. We are told the stock Assualt hooks will work with this bar however we have not confirmed this. You can cut the bar ends down if you want to your desired width, bars are 29.5" wide. Assualt Pro-Taper bars are 28.5" wide with the hooks removed. OEM hooks add 1" per side. Wrenchless levers and bar pads available seperatly.

View larger image

$279.00
Order now
Product number Assault-SK01
OUT OF STOCK

Nytro MTX 4-7 Riser kit
Nytro MTX Riser kit includes- Rox Nytro specific 1.75" high Pivot adapter and Rox 4.3"-7" Height Adjustable Risers. This kit allows you to pivot your bars forward and back as well as adjust them up and down. The stock MTX riser is 6". With the pivot adapter (1.75") and H/A riser installed and collapsed to 4.3", you are at about stock height (6.05") with the ability to pivot. You can raise the stock bar height nearly 2" before replacing any cables so we would recommend leaving the 1" limit stops installed on the H/A risers, providing nearly 8" of total rise. Wrenchless lever kits available seperatly.

View larger image