Handlebar Risers for the Dual Sport Rider
New! Pro Offset Block Risers
Whether you spend the majority of the day on the highway or on unimproved fire road, motorcycle handlebar risers add to your comfort and reduces fatigue.
Handlebars that are too low induce shoulder fatigue and reduce the control of your motorcycle. Raising your handle bars with Rox Pro Offset Risers reduces the weight to your hands and moves your posture into a more upright stance. Stress is reduced at crucial joints; riding your dual sport motorcycle is more enjoyable.
 |
NEW Pro-Offset block Riser Rox new offset block Riser raises your bar straight up 1- 1/4" (vertical) or up 1" and back 1" when installed the other direction. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center to center distance with 8mm bolt threads acting as a fat-bar adaptor or they will work to raise your stock fat-bars on BMW's (not 08 adventure), KTM's and more. Always check and confirm that your bike has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
NEW Pro-Offset Elite block riser Our new Pro-Offset Elite riser comes with the addition of 7/8" reducers. This allows you to clamp 7/8" bars or remove them to clamp 1-1/8" "fatbars", making use of your stock bars now at a more comfortable height and upgrading to fatbars later. Reducers lock into risers to insure no slippage between components, as well they have serrated teeth in them for maximum gripping power on handlebar. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center to center distance with 8mm bolt threads. Always check and confirm that your bike has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
 |
1 1/4" Block Risers Reduced price from $44.95. Non pivoting riser designed to rest on your original supporting handlebar clamps and re-use your original cap. Longer bolts provided. Raises your 7/8" bars 1-1/4" center to center. Installs on XR650, XRL650, DR-Z400, DR650 and others with OEM HEX HEAD, 8mm bolts. Keep in mind that your bars will typically come back towards you at the same rate as your fork tube angle. If you are looking to raise your bars straight up consider the Pro-Offset or Pivoting Riser options. Always check and confirm that your bike has adeguate cable and brakeline length before installing any handlebar risers. View larger image |
KTM Motorcycle with Handlebar Risers
Notes:- Caution: First determine if you have adequate cable and brake line length length before installing handlebar risers
- Amount of extra cable length varies based on make and model
- It is recommended that you consult your local dealer for longer cables, if needed.
- Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
- Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.
Dual Sport Motorcycle Bar Pads
Dual Sport Motorcycle Handlebar Pivoting Risers
Dual Sport Motorcycle Handguards
Dual Sport Motorcycle Grips