Rox Patented Pivoting Cruiser Motorcycle Handlebar Risers
Rox unique riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar position options for you to find the right height and pull-back for your riding position and stature.
Keep in mind these risers work great if you are interested in changing to a bar that has a different sweep but happens to be lower; you can now gain back the height plus add fore and aft position selection.
If you are experiencing discomfort after a few hours of riding give these Rox cruiser risers closer consideration. We trust this product will bring you a new and expected level of comfort. Our goal is to provide you not only with an attractive, eye catching accessory but as importantly a means of acquiring the proper ergonomic position so you can return your attention back to the pleasures and sights of the open road.
 |
NEW Black Pivot Risers 2.75" rise x 1"clamps x1"bars Universal Pivoting Riser for 1" diameter bars. When pivoted back 45 degrees they move your bars 2" up and 2" back. Machined from 6061-T6 aluminum, anodized black. Risers will clamp into nearly any bike with 1" diameter clamps. Check cable length on your bike before ordering, longer cables and brake line may be necessary. We recommend replacing your stock lines with extended lines 2"-3" longer than stock. If you are going to a lower bar and using the risers to adjust the position fore or aft, longer cables may not be necessary. View larger image |
 |
NEW Chrome Pivot Risers 2.75" rise x 1"clamps x1"bars Universal Pivoting Riser for 1" diameter bars. When pivoted back 45 degrees they move your bars 2" up and 2" back. Machined from 6061-T6 aluminum, anodized black. Risers will clamp into nearly any bike with 1" diameter clamps. Check cable length on your bike before ordering, longer cables and brake line may be necessary. We recommend replacing your stock lines with extended lines 2"-3" longer than stock. If you are going to a lower bar and using the risers to adjust the position fore or aft, longer cables may not be necessary. Chrome Risers come with chrome bolt head buttons. View larger image $154.95 Order now Product number 4R-P3CC02 OUT OF STOCK |
Motorcycle Handlebar Risers
Notes:
- Caution: Extended cables may be required for installing handlebar risers.
- Amount of extra cable length may vary depending on vehicle and handlebar choice.
- Rox Speed FX recommends that extended brake lines, throttle, and clutch cables be installed by an authorized technician at your local Dealer or service center.
- Important: After installation check for any binding or pinching of the control cables (throttle cable, brake hose/cable) etc. When you are sure nothing is binding, start machine in neutral, slowly turn handlebar from left to right, if the engine idle speed increases STOP TURNING HANDLEBARS, TURN OFF ENGINE, YOUR THROTTLE CABLE IS BINDING. Check throttle routing and length. You may have to adjust position of controls, or purchase extended cables.
- Caution: Rox Speed FX is not responsible for injury or death resulting from improper installation! Thoroughly read and follow instructions.
